High quality design incorporating precision bearings and aluminium cantilever arm.
Sensitivity threshold is very low to ensure an optimum accuracy even in light winds. Balanced wind vane for increased accuracy and stability at heel. Sturdy construction and watertight connector.
Compatible with all NMEA0183 instruments (S400, Depth and Speed S400, Repeat S400, WiFi Advansea interface, chart reader, navigation software, radar, etc…).
The RX-110 outputs the received AIS data transmitted by vessels with class A and B transponders on the VHF network.
NMEA0183
USB
NMEA 2000
VHF Splitter.
Enables the simultaneous use of the vessel’s installed marine VHF radio and an AIS transmitter or receiver via a single VHF antenna.
This Class-B AIS transceiver module enables both the transmission and reception of AIS data from your boat. Your vessel identification data is programmed into the TR-210 using the software and cable included with the transceiver. The TR-210 AIS transceiver output connects to your GPS/Plotter via the NMEA 0183 interface and to your PC through the USB connector. The TR-210 has an internal GPS antenna providing vessel position data to the AIS transmitter.
An external GPS antenna can be connected if necessary (ref. 62173).
NMEA 0183
USB
NMEA 2000
Antenna mounting base for instruments T.50, T.56, C56.
AdvanSea Bus : Each S400 instrument features AS-1 Bus. This Half Duplex single-cable bi-directional 38400 baud Bus, enables extremely fast and reliable exchanges between all S400 instruments on board. Up to 20 S400 instruments can be connected to this network.
In addition, the AdvanSea AS-1 junction box (ref. 57765) facilitates the data transfer between 3 AdvanSea instruments through the AS-1 Bus, and allows NMEA connection to or from the instruments.
*Depends on transducer.
For transceiver AIS TR-210.
GPS antenna with cable and BNC plug for intruments T.50, T.56, C.56
This multiplexer centralizes all NMEA 0183 data sources into a single stream.
Then, the data is transmitted via WiFi and accessible from a wireless device : laptop, tablet or smartphone.
Once the instruments are connected, the interface automatically configures itself.
